Quantities: 500 – 15,000
Paper Type: 100 lbs Text
Sides: 4/0 Full Color Front or 4/4 Full Color Front & Back
Coating: UV on Front Only , UV on Both Sides or Matt Finish
Folding: No Fold, Bi-Fold, Tri-Fold, Z Fold
The most common order options are 11″ x 8.5″ before folding on 100# Gloss Text weight paper. Almost always, Brochures are printed full color on both sides (4/4). The most common folds are Tri-Folds, Z-Folds, and Half-Folds. Tri-Folds and Z-Folds give you 3 panels to display your information on each side. Half-Folds give you 2 panels on each side.
The most common order options are 5.5″ x 8.5 and 8.5 x 11″ with no folding on 100# Gloss Text weight paper. Flyers are typically printed in full color on one or both sides (4/4, 4/0). Flyers are flat (not folded).
For higher quantities and additional stock choices, please check out our 4-Color Offset Brochures and Flyers.
For orders with 1 or 2 color printing, including Pantone colors, please check out our 1 & 2 Color Brochures and Flyers.
In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file.
- Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
- Use a minimum resolution of 300 dpi for image files.
- All fonts need to be outlined or embedded.
- Specify trim area with crop marks. (Don’t place crop marks inside the work area.)
- Artwork should have 1/8″ (0.125″) bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- If you want printed borders, they must be placed a minimum of 1/8″ (0.125″) inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
We require that you extend any images that run up to the trim line a minimum of 1/8″ (0.125″) past the trim line to create “bleed”. Depending on what program you use to create your file, this may or may not change the total image area of your file. Programs like Photoshop that do not allow the creation of “bleed” or the addition of crop marks will require an image area that is 1/4″ (0.25″) larger than your desired final overall image area in both dimensions.
Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge. If you choose to make less than this minimum clearance, we will NOT be responsible for items that are cut off in this area.
Call us 954-505-1793 for more information and/or instructions.